The Calypso label package provides two templates for 140mm x 40mm Calypso labels
This template can be used where the grower and packer are the same.
This template provides separate grower and packer details.
An Excel spreadsheet defines the codes used by Woolworths and Coles. The codes are selected based on Tray Type and Size.
The following tray-types are included in the code spreadsheet. You can add more as required.
|6 per layer||mod6, B06, C06|
|8 per layer||mod8, C08, G08|
|12 per layer||mod12, B12, C12|
If you need to use other codes for tray types, you must add them to the Excel spreadsheet.
After installing the package, go to the Label Setup tab and create a label. You must complete each of these steps:
Make sure that the following fields are completed for any grower records you will use with this label. If you are using the HarvestExport extension you should also enter the Harvest code for the grower as addr4.
Make sure that the following fields are completed for the receiver record.
Make sure that the following fields are completed for the packer record. Note that the packer shedNumber will appear on the label so it must be completed. If you are using the HarvestExport extension you should also enter the Harvest code for the packer.