Calypso Label Package

The Calypso label package provides two templates for 140mm x 40mm Calypso labels

Calypso 140x40 Template

This template can be used where the grower and packer are the same.

Calypso 140x40 Grower/Packer Template

This template provides separate grower and packer details.

If your label is not showing barcodes, the combination of tray type and size you are using is not in the code spreadsheet.

Supported Tray Types

An Excel spreadsheet defines the codes used by Woolworths and Coles. The codes are selected based on Tray Type and Size.

The following tray-types are included in the code spreadsheet. You can add more as required.

6 per layermod6, B06, C06
8 per layermod8, C08, G08
12 per layermod12, B12, C12

If you need to use other codes for tray types, you must add them to the Excel spreadsheet.

Creating a Label

After installing the package, go to the Label Setup tab and create a label. You must complete each of these steps:

  1. Set the Template to one of the new Calypso templates,
  2. Set the ICA field to "MEETS ICA nn",
  3. Enter a Coles vendor number in the vendor_number field,
  4. Save!

Configure Growers

Make sure that the following fields are completed for any grower records you will use with this label. If you are using the HarvestExport extension you should also enter the Harvest code for the grower as addr4.

Configure Receivers

Make sure that the following fields are completed for the receiver record.

Configure Packers

Make sure that the following fields are completed for the packer record. Note that the packer shedNumber will appear on the label so it must be completed. If you are using the HarvestExport extension you should also enter the Harvest code for the packer.